Author Archives: Ben

About Ben

Ben is a computer and network consultant who is constantly teaching himself and others new things while trying to be the best at each one of them. Especially teaching. Follow @rtech, @benonbeer, and @42flows for more.

Temperature Data, Part I

Johnson Controls A19AAT-2C

I brewed a pumpkin ale on October 5 and have had it in an old refrigerator controlled by a Johnson Controls A19AAT-2C thermostat ever since.  I finally got around to installing two digital temperature sensors a couple of days ago: one inside the fridge and one hanging outside to measure ambient temperature.  Now that a full 24-hour period has passed, I have some data!

Using a simple spreadsheet program, I graphed the temperature data for yesterday.  I’m interested to see how far the temperature fluctuates given the ambient temperature and how well the Johnson Controls thermostat works.

I already see one problem: it’s Autumn here in South Georgia, and the outdoor temperatures vary from below to above the ideal ale fermentation temperature nearly every day.  The thermostat only tells my refrigerator when to turn on, and can’t do anything when the temperature is too low.  I’m searching for a heater now…

fermentemp-20141015_2

Leave a Comment

Filed under Laboratory

Extract to Grain Conversion

Last night I was putting together a new recipe for this year’s Pumpkin AleBack in 2012 I made a decent one with dried malt extract, but since I’ve stepped up to all-grain brewing I need to convert the recipe from extract to all-grain.  I came across this old article at BYO on converting an amount of extract to an equivalent amount of grain, and there’s a technical aspect of this that I like. It goes something like this:

A pound of dried malt extract (DME) brings a gallon of water to a specific gravity of 1.045.  That, we say, is 45 points.  One pound of the 2-row grains I intend to use will bring a gallon of water to 1.036 SG, equalling 36 points, but only at 100% efficiency.  Assuming my home brewery will only get 75% efficiency, I will get 75% of those 36 points, which is 27.

Stay with me here…

We divide those two values (the DME points and the grain points) to get a percentage of points that the DME has over the grains:

45/27 ≈ 1.67

My original recipe calls for 3 pounds of DME, which when multiplied by 1.67 is 5.01.  This means I will need 5.01 pounds of grain to get the equivalent amount of fermentables I would have with 3 pounds of DME.

While I enjoy all the math and science that brewing lends I can’t help but sit back and say to myself, “Dude…  You’re making homebrew.  It’s supposed to be fun – not rocket science.”

And I say “self, I agree.”  There is some interesting fun with trying the math, but realistically there is no way (in my home brewery) to accurately gauge mash efficiency.  Hell – I might be doing something accidentally right to get 89%, but who knows?  Even if I sweat over the details and get exact measurements of grain according to the formula output, I’ll never really know if my all-grain batch came out just the same as the extract.  In all likelihood the product will be good and at least similar to the extract batch, and the details won’t keep me up at night.

Those kinds of details matter to professional brewers, but I doubt they use malt extracts in their pilot systems.

Leave a Comment

Filed under Laboratory

DraughtKeg Disassembly

The Story

My family has four refrigerators.  One obviously in the kitchen, one I bought for my computer shop, one in my wife’s classroom, and one tiny fridge I picked up for $25 to put my lunch in at work.  I had this tiny refrigerator in my office for a couple of years and decided to take my shop fridge to work because it’s bigger.  Now I have this small and nearly useless fridge in my house with few ideas about what to do with it.

The DraughtKeg is a proprietary 5-liter package of beer that appears to be from Heineken and is pressurized with an internal CO2 cartridge.  It comes with a few plastic pieces used to serve beer directly from the keg, but it is also compatible with the Krupps BeerTender appliance.  There are several other brands of beer available in DraughtKegs, but I’ve only seen Heineken, Heineken Light, and Newcastle Brown Ale with my own eyes.  I’ve noticed the DraughtKeg in stores for a while now, but since my mind has been on kegging homebrew lately I wondered if the keg itself could be reused for kegging homebrew.  It turns out that it’s not, but if you ever wondered what’s inside one of these you don’t have to spend your own $20 on one to find out.

The Disassembly

I purchased this DraughtKeg at my local Publix supermarket and spent a couple of days emptying it.  Five liters is 14.09 twelve-ounce servings; I think it took four days or so.  When it finally tapped out, I grabbed the camera and some tools.  The only thing stopping a project to reuse the keg is the internal CO2 cartridge.  It can’t be removed through the 1″ hole in the top.  It is also glued to the bottom, which would make sanitizing the keg quite tedious if not impossible.  The slideshow below will walk you through disassembly:

Conclusion

While the DraughtKeg is convenient, it’s not eco-friendly.  It’s made of recyclable steel – which is perfectly fine – but it would be nice if it were refillable.  I’m not asking them to change it, but I’m not encouraged to buy another one.  My next bit of research for this little endeavor involves a 2.5-Gallon Cornelius Keg, but that may be too big for my tiny fridge.  We’ll see.

Leave a Comment

Filed under Laboratory

Pumpkin Ale 2014

So here’s the recipe for my 2014 Pumpkin Ale:

  • 9 lb 2-row pale malt
  • 1 lb 20L Crystal
  • 3 oz Chocolate malt
  • 3.75 lb Roasted Pumpkin
  • 2.5 tsp cinnamon (5 min.)
  • 1.5 tsp nutmeg (5 min.)
  • 1.5 tsp allspice (5 min.)
  • 0.75 oz Northern Brewer hop pellets, 9.4% AA (60 min.)
  • 1 oz East Kent Goldings, 5.7% AA (15 min.)
  • White Labs California Ale yeast (WLP001)

I put this recipe in BeerSmith 2 and it gives the following expectations:

  • 1.053 OG
  • 1.013 FG
  • 33.5 IBU
  • 10.9 SRM (about this color…)
  • 5.19% ABV

Leave a Comment

Filed under Recipes

Georgia Pale Ale

This is batch 24 – a special pale ale.  Not an India Pale Ale, but more than American: a Georgia Pale Ale, or GPA.

The Reason

Since the coffee beer I made in January didn’t turn out the way I wanted, I decided I to make something I’d actually drink and enjoy.  I took a general American Pale Ale recipe from the January-February issue of Brew Your Own and scaled it up to make 10 gallons.

The Recipe

  • 21 lbs Rahr Pale Ale Malt
  • 2 lbs Briess Victory Malt
  • 1 lb Rahr White Wheat Malt
  • 1 lb Briess Munich 10L Malt
  • 1 oz Horizon hop pellets (12% AA)
  • 1 oz Centennial hop pellets (10.5% AA)
  • 1 oz Cascade hop pellets (6.5% AA)
  • 2 vials White Labs WLP001 California Ale yeast

The basic process is easy with the right equipment:

  1. Mash all of the grain at 1.5 quarts per pound and 152°F (67°C) for one hour.
  2. Mash out at 168°F (76°C).
  3. Sparge slowly with 170°F (77°C) until you reach your target boil volume.
  4. Boil the Horizon pellets for 60 minutes.
  5. Add half the Centennial and Cascade hops at 10 minutes.
  6. Add the remainder of Centennial and Cascade hops at flameout (0 minutes).
  7. Cool wort, transfer to fermenter, and pitch yeast.

Fresh Hops in the Boil

See, What Had Happened Was…

I lost access to my recipe on Brewer’s Friend (for the day, it seems…) and really wasn’t thinking when I was sparging – I ended up with a 14-gallon boil when my target should have been about 11.5 gallons or so.  However, I didn’t fret – I just boiled it down to my batch size.  During that extraordinarily long boil time (175 minutes!), I took the liberty of adding hops fresh from my front porch three times.  Using that boil time, here’s the hop schedule:

  • 175 minutes: 1 oz Horizon pellets, 0.3 oz whole-leaf Centennial (5 cones)
  • 153 minutes: 0.3 oz whole-leaf Centennial
  • 111 minutes: 0.3 oz whole-leaf Centennial
  • 55 minutes: 0.3 oz whole-leaf Centennial
  • 37 minutes: 0.5 oz Centennial pellets, 0.5 oz Cascade pellets
  • 1 minute: 0.5 oz Centennial pellets, 0.5 oz Cascade pellets

The recipe in BYO said the original gravity would be 1.056, but my OG (adjusted) was 1.062.  It smells awesome and there’s lots of slurry in the bottom of the fermenters.  That might lend even more bitterness; we’ll wait and see.  It’s heavy so it might actually be balanced a bit.  I’d like to keep this recipe and tweak it for next time.  I’ll try to update this post as fermentation proceeds or when I get to bottling day.  I intend to put all of this in 12-oz bottles – wish me luck…

Bottling Day

Bottling day (Labor Day 2014) went off without a hitch.  I ended up with 84-12oz capped and 4-16oz swing-top bottles.  They’re conditioning along the wall at the moment…  conditioningI’ll open the first one on Saturday, September 27th – my 36th birthday.

Leave a Comment

Filed under Recipes

Home Brewing Blog: GO.

I’m glad you have stumbled upon this brand-new, unplanned, direction-less idea I had one day.  Here’s the plan I just made up:

I’m a home beer brewer and I want to make better beer than I have in the past.  I imagine this might be something other home brewers want to do as well.

What I have planned for 2014 is, well, better brewing.  To achieve better tasting and more consistent batches I’ll be performing experiments, reading a lot, and the only thing to do in order to make better beer: brewing more beer.  Along the way I’ll be automating parts of my home brewery and processes and making my best attempt at recording everything I do.

I mean recording in a sense that I’ll be documenting; I don’t plan on creating a lot of video content at the moment.  Some of the content here might show up on the beer show I need to pick up again and/or the beer blog I rarely post to.

My intention is to begin brewing the first or second weekend in January 2014, so subscribe to the blog if you’re inclined to read your collection of RSS feeds.  Otherwise I’m sure I’ll be shouting out on Twitter when I have posted something.  Follow @BenOnBeer for some of that good beer news, reviews, and thoughts.

Like I said before, this wasn’t very well planned.  After a few days and getting WordPress set up it still sounds like a good idea, so I’ll move forward.

Until next time,

-ben

Leave a Comment

Filed under Meta